Jensen CR1610 Guide De Démarrage Rapide

(JENSE
ANTENNA JACK
Connect to the factory or aftermarket antenna lead. (Optional
extensions or adapters may be necessary depending
on the type of vehicle you have.)
o
O
o
o
RCA OUTPUT
Connect to an
optional amplifier.
o
AMP
O
ACCESSORY
Connect the red wire to the factory
Accessory or Ignition wire, which
receives power when the key is
turned on.
CHASSIS GROUND
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
BATTERY
Connect the yellow wire to the battery
or 12 volt power source that is always
o
e
live. This wire MUST
for the radio to work.
CR1610 Receiver Quick
nno
o
000
FILTER &
FUSE Box
INPUT
be connected
Start Guide
IMPORTANT:
can damage
o
instructions
installation
o technician.
CD CHANGER
CONNECTOR
o
POWER ANTENNA/
REMOTE AMP TURN ON LEAD
Positive (+) 12VDC output when the head
unit is turned on. Connect the blue
a motorized antenna or to an amplifier.
Incorrect wiring connections
the unit. Follow the wiring
carefully, or have the
handled by an experienced
Right Front Right Rear
SPEAKERS
Left Front Left Rear
wire to
Need help?
For technical assistance,
the Jensen customer
support line at 1-800-323-4815.
call