Operation Details - Panasonic Cz-Rd514C Mode D'emploi

DAILY TIMER SETTING DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
1 • Press once to change the
display from Clock to Timer
TIMER/CLOCK
MODE UP SELECT
or vice-versa.
• Press for more than 4
OFF/ON DOWN SET
seconds to change the
CLOCK CANCEL
display from Daily Timer to
Weekly Timer or vice-versa.
3 Set the time
2 Select ON or
4 Confi rm
OFF timer
• To cancel ON or OFF timer, press
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing
WEEKLY TIMER SETTING WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to
6 programs in any given day.
MODE
1. Press Timer for 4 seconds to change display to
weekly timer.
UP DOWN
2. Press Timer or to select your desired day.
SELECT
3. Press to confi rm your selection.
4. "1" will be blinking, press
OFF/ON
5. Press Timer to select ON or OFF timer.
UP DOWN
6. Press Timer or to select your desired time.
If you want to set the timer together with your desired
temperature, press
TEMP
SET
7. Press to confi rm program 1. The selected day will
be highlighted with .
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• Same timer program cannot be set in the same day.
• During timer setup, if no button is pressed within 30
SET
seconds, or if the button is pressed, the setting at
that moment is confi rmed and timer setup is ended.
CANCEL
.
SET
.
SELECT
to set program 1.
to select the temperature.

OPERATION DETAILS

OPERATION DETAILS
The timer setting will shown at wired remote control
only but not at indoor unit's TIMER indicator.
Check Current Timer Program
Perform the step below to check the timer program for
a particular day.
MODE
1. Press Timer
SELECT
2. Press to enter day setting.
UP
3. Press Timer or
SELECT
shown, press
UP
4. Press Timer or
Modify Current Timer Program or Add New Timer
Program
MODE
1. Press Timer
SELECT
2. Press to enter day setting.
UP
3. Press Timer or
shown.
4. Perform steps 4 to 7 of "WEEKLY TIMER SETTING"
to modify existing timer program, or add any timer
program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for
a particular day.
SELECT
1. Press to enter day.
UP
2. Press Timer or
shown.
SELECT
3. Press to enter program setting.
UP
4. Press Timer or
shown.
CANCEL
Press to cancel the program,
disappear.
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
CANCEL
press .
• To enable previous weekly timer setting, press
SET
then press .
• When wired remote control is installed ECONAVI,
AUTO COMFORT, MILD DRY operation setting
from wireless remote control might be disabled.
But POWERFUL, QUIET, PATROL, e-ion operation
setting could be operate according to wireless remote
control.
• When wired remote control is in operation, the timer
setting from wireless remote control will be cancelled.
https://manual-hub.com/
to enter timer mode.
DOWN
until your desired day is
to confi rm your selection.
DOWN
to check the set programs.
to enter timer mode.
DOWN
until your desired day is
DOWN
until your desired day is
DOWN
until your desired program is
will
MODE
, then
NOTE NOTE
MODE
,
3