Traxxas SLASH MODIFIED Manuel D'utilisation

Slash Modified Late Model Body Assembly Instructions
Tools required:
• Body scissors (part #3431 or 3432,
sold separately)
• Tapered body reamer (part #3433 or
3433X, sold separately)
• 2.0mm hex wrench (sold separately)
The included body is
untrimmed and will
need to be cut along the
indicated lines in order to
fit the stock chassis.
Optional trim lines on the
front and rear of the body
can be cut to alter the ride
angle of the body.
10415
RA
10428
Optional body angle
trim lines
10428
2551
2551
3x10 CCS
3x10 CCS
10416
2551
10416
3x10 CCS
10416
10416
10416
10413
10413
10415
RC
10415
RB
2577
3x10 BCS
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
CAUTION: RISK OF INJURY!
Use care with hobby knives, tapered reamers, and other
cutting tools as they are extremely sharp and can cause
severe injury, deep cuts, and/or punctures.
10423
10429
10423
Optional
trim lines
10415
LC
10415
LB
10415
LA
10414
2551
3x10 CCS
10413
10416
3931
2551
3x8 FCS
3x10 CCS
10416
3931
3x8 FCS
3x15 BCS
2577
3x10 BCS
2577
3x10 BCS
10417
2577
10423
3x10 BCS
2577
3x10 BCS
2577
10417
3x10 BCS
10417
10429
2577
3x10 BCS
10412
2580
3x20 BCS
Covers Part #10423
3931 3931
3x8 FCS
3x8 FCS
10423
2579
2577
3x10 BCS
2579
3x15 BCS
10412
2578
10417
3x12 BCS
2578
3x12 BCS
10423
2577
3x10 BCS
KC24082-R01 Rev 250116