Tapp Tapplock one+ Manuel De L'utilisateur page 9

Fingerprint Mode
To turn on Tapplock one+, press the power button
once (1) located below the rim. The status indicator
light will be white. Your Tapplock one+ is now ready
to unlock with your registered fingerprint.
If you are having trouble getting to fingerprint mode,
hold down the power button until the status indicator
light turns off, putting your lock in sleep mode. Then
press the power button once (1) to enter fingerprint
mode.
** Tapplock one+ will automatically enter sleep
mode after 10 seconds of inactivity. This increases
the lifespan of your battery.
9