Konect LIPOMAX Manuel D'instructions

EN
INSTRUCTIONS
LIPOMAX is a TYPEC input with a built-in fast
charging protocol and high accuracy of balanced
charger.
• Charge and balance management. Support LiPo.
• Input voltage: DC 9.0-20.0V.
• Support 2-3S LiPo battery, MAX 3.0A.
• Charge accuracy < 0.01V.
• Balance current: 200mA.
Overview
1. AC input 2. LED display
3. Output port 4. Vents
Accessories
TYPEC Cable 50cm
Using Instructions
1. Connect the power cord, the power on is complete, and the
LED light will be lit up to green.
2. Connect to the battery balance port, and the charger will I
automatically start charging after detecting that the battery is
connected normally.
3. When the LED light is green, it means standby or charging
is complete. When the LED is red, it means that it is charging.
When the LED ashes red and green alternately, a battery
error is recognized.
Parameters
Input voltage DC 9.0-20.0V
TYPEC protocol PD, QC, AFC, SCP
Type of battery LiPo 2-3S
Charge power 3.0A@2S 3.0A@3S
Balance current MAX 200mA @2-3S
Charge accuracy <0.01V
Safety
1. LIPOMAX allows Typec input DC 9-20V, please use
normal voltage.
2. Do not use this product in heat, moisture, ammable or
explosive atmospheres.
3. Make sure that the product is running under the
attendance of the user.
4. Please unplug the input power when not using this
product.