Extreme Max 5600.3115 Manuel D'installation

-naäuC7$
Warning:
Risk of personal injury or property
in a sudden release of the
winch manufacturer's instructions
Includes:
1. Winch Plate x 1
U-Bolt Plate x 2
2.
3. U-Bolt x 2
4. Lock Nut x 4
5. Hex Bolt x 2
6. Flat Washer x 6
Product Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted for consumer
Warranty valid only in the USA.
This product is warranted to the original
wear and tear expected. This warranty
of goods or any acts of vandalism
commercial use. The sole remedy under this warranty
or similar product, or the refund
or incidental damages. Any and all freight charges to handle warranty
Extreme MaxTM is not responsible
For all inquries please send your name, mailing address, main contact phone number,
summary of alleged defect
Prior to Installation:
I. Turn off vehicle and lock
2. Locate the battery compartment.
cables.
Honda@ Foreman Installation
Keep track of all hardware
I. Remove the two bolts attaching
2. Inside the bumper, place the winch
3. Using Figure I as reference,
U-bolt plate on the open threads
4. Locate the tabs for the fairlead
with the mounting holes in the fairlead
Locate the desired position
5.
hardware included with
6. Using the two provided
frame.
7. Tighten all hardware.
8. Connect the winch wiring
Customer Service: service@extrememax.com
Winch Mount
Rubicon ('07-'14)
damage. An improperly
winch mount and/or winch
for proper mounting
Figure 1
Guarantee
on making quality products
use for 1 year after the date of retail purchase. Warranty
retail purchaser
shall not apply to any defects caused by: (I) overloading,
by any person, (Ill) improper
of the original purchase
for any labor charges that may be incurred.
and any applicable pictures
the brakes.
Remove the ground
Instructions:
being removed from the ATV; most will be returned
the middle of the bumper
plate into position
install the two U-bolts
of both U-bolts and loosely secure it to the bumper
along the front side of the winch
and attach it with the hardware
for the winch on the winch
the winch to attach the winch
hex bolts, replace the two original
in accordance with the winch
Kit for Honda@ Foreman
Mounting
mounted winch may result
from the ATV frame. Follow
and use of your winch.
o
0
and wish to correct any mistakes on our end. If you are
to be free from defects in material and workmanship,
installation or use contrary to the instructions,
is at the discretion of manufacturer:
price. Extreme MaxTM is not responsible
claims are the responsibility
to service@extrememax.com.
terminal, then the positive
to its original
to the ATV Frame.
as shown in Figure 2.
through the winch plate and around the bumper frame.
plate. Align the mounting
supplied
plate, matching the mounting
to the winch plate.
bolts in the middle of the bumper
manufacturer's instructions.
I www.extrememax.com
('07-'11)/
Installation
5600.3116
all
0
0
o
o
includes parts only.
(II) physical abuse
the replacement of the same
for any consequential
of the consumer.
original retail sales receipt,
terminal to disconnect the battery
location.
frame with lock nuts.
holes in the winch plate
with the winch/fairlead.
patterns of the winch.
attaching it to the ATV
ordinary
(IV)
Place a
Use the
3399ex0120