Raider RD-HPC09 Mode D'emploi page 18

www.raider.bg
18
Problems
Machine is not
starting
The engine stops
Working pressure is
too high
Pulsing pressure
The engine is working
but there is no
pressure
If necessary, repair your machine is best carried out only by qualified specialists in workshops
RAIDER, which used only original spare parts. Thus ensuring their safe operation.
11. Environmental protection.
Do not dispose of disused electric household waste! In order to protect the environment and
Directive 2012/19/EC, they must be collected separately and be subjected to appropriate processing
for recovery of the information contained in these materials.
Cause
the plug is not inserted in the
socket.
the socket is broken.
The safety switch has been
activated
The extension cable is
damaged
The automated protection has
bee activated
The nozzle is partly stuck
There is air in the ump or the
hose..
Watter feeding is not good.
Water filter (6а) need cleaning. Check and clean the water filter.
The water hose is twisted or
folded.
There is no water feeding.
The filter (6а) need cleaning.
What to do
Insert the plug in the socket
Use another socket
After checking the reason for activation of the
safety swith, replace it (ot switch it on)
Replace it.
Wait a few minutes untill engine cools
Check and clean it
Remove the extra air
Ensure that the parametserof the water network
are appropriate.
Check and fix it
Turn the water supply on.
Check and clean the water filter.