Kokido Telsa EV30 Manuel D'utilisation page 17

Press the locking button until the locking hole on the clear canister is released. Slide
2.
the canister away until the notch on the bottom of canister opening is released from
the hook on the bottom of main body. Remove the filter bag/filter cage from the main
body.
CAUTION! Replace the damaged filter bag/filter cage immediately before the next
operation.
3. Clean out the debris and rinse the filter bag/filter cage with water. If brushing is
deemed necessary, use only a soft brush to clean the filter bag/filter cage gently and
carefully.
4. Re-position the filter bag/filter cage inside the main body. Make sure the filter
bag/filter cage is completely inserted inside the main body. Make sure the net is
completely inserted inside the main body and does not stick out.
To re-install the canister, first align the notch of the canister with the hook on main body
and then press the canister onto main body. Make sure the locking hole on the clear
canister is secured with the locking button.
16