Balluff BNI IOL-727-S51-P012 Notice D'utilisation page 45

BNI IOL-727-S51-P012 / BNI IOL-728-S51-P012
Network interface – Analog hub
10
Technical data (continued)
10.7.2 UL
UL requirements
File
Enclosure rating Type 1
Ambient
temperature
The power supply has to be an isolated type or SELV type.
Power Ratings
Power input, nominal
rated voltage 24 V DC
BNI IOL-728-... – 60 mA maximum consumption
– 1.26 A including all output
loads
BNI IOL-727-... – 130 mA maximum
consumption
– 4 A including all output loads
Sensor output, nominal – 0.2 A max/point /
rated voltage 24 V DC – 1.6 A max/unit
Digital input, nominal – 30 mA max/point
rated voltage 24 V DC
(BNI IOL-727-...)
Digital output, nominal – 0.5 A/point resistive/general
rated voltage 24 V DC use
(BNI IOL-727-...)
– 4 A or less per unit
Analog input – 30 mA max configurable
Cleaning
Clean the product only with dry cloth or cloth dampened
only with water!
www.balluff.com
Cord Sizes
Communication/Power In cord assembly:
Listed (CYJV/7) or R/C (CYJV2/8) cord assembly with
threaded male A-coded M12 connector rated 24 V
minimum, 2 A minimum. R/C (AVLV2) marked or specified
E319845
in UL style page as suitable for external interconnection
28 AWG minimum, 300 V minimum cord.
+50 °C In/Out cord assembly:
Listed (CYJV/7) or R/C (CYJV2/8) cord assembly with
threaded male A-coded M12 connector rated 24 V
minimum, 2 A minimum. R/C (AVLV2) marked or specified
in UL style page as suitable for external interconnection
Cord rated 300 V minimum, 24 AWG minimum unless
marked with maximum load current and overcurrent
protection for the cord in accordance with table below.
Cord
conductor
size, AWG
Overcurrent
protection
maximum
ampere rating,
Amps
Maximum
load, Amps
Tab. 10-1: Cord sizes
14 14 16 18 20 22 24 26 28 30
16 12 8 5.6 5 3 2 1 0.8 0.5
16 9 8 5.6 4 2.4 1.6 0.8 0.6 0.4
english 21