Haussmann PT110942 Guide De L'utilisateur page 21

SAFETY INSTRUCTIONS
4) Power tool use and care
a、Do not force the power tool. Use the power tool correctly for your application.
The correct use will do the job better and safer at the rate for which it was
designed.
b、Do not use the power tool if the switch can't turn the tool on or off. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c、Disconnect the battery pack from the power tool before making any adjust-
ments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of staring the power tool accidentally.
d、Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e、Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f、 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g、Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery-powered tool use and care
a、Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b、Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c、When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, which can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d、Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery may cause irritation or
burns
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is main-
tained.
20