Ledvance LINK WALLSWITCH1A3KEYUNVBLE Guide D'installation
Les langues disponibles
Les langues disponibles
LEDVANCE LINK
BLUETOOTH® LOW ENERGY MESH LINE
VOLTAGE 3-BUTTON WALL CONTROLLER
Model : WALLSWITCH1A3KEYUNVBLE
NAED: 63829
Field-installable Line Voltage powered 3-button Wall Controller.
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. THIS PRODUCT MUST BE
WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL CODES.
• TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL INSTALLATION
SERVICES.
• TO AVOID COMPONENT DAMAGE, DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR SERVICING.
• USE CAUTION WHEN HANDLING THE PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND CAUSE BURNS.
DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING.
• ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS PERSONAL
INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
• TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP
OBJECTS.
For warranty coverage, please register at www.ledvanceUS.com
0000000
INSTALLATION GUIDE
TM
Please Read All Instructions Before Attempting Installation
WARNING
Table des Matières
Manuels Connexes pour Ledvance LINK WALLSWITCH1A3KEYUNVBLE
Sommaire des Matières pour Ledvance LINK WALLSWITCH1A3KEYUNVBLE
- Page 1 INSTALLATION GUIDE LEDVANCE LINK BLUETOOTH® LOW ENERGY MESH LINE VOLTAGE 3-BUTTON WALL CONTROLLER Model : WALLSWITCH1A3KEYUNVBLE NAED: 63829 Field-installable Line Voltage powered 3-button Wall Controller. WARNING Please Read All Instructions Before Attempting Installation • THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
-
Page 2: General Specifications
GENERAL: • Upon receipt of the device, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. • Turn off electrical power at fuse or circuit breaker box before wiring device to the power supply. •... - Page 3 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LEDVANCE LLC is under license. All other trademarks are those of their respective owners. Specifications subject to change without notice.
-
Page 4: Contrôleur Mural À 3 Boutonsà Tension Régulière Maillé Bluetooth ® Faible Énergie
GUIDE D’INSTALLATION LEDVANCE LINK CONTRÔLEUR MURAL À 3 BOUTONS À TENSION RÉGULIÈRE MAILLÉ BLUETOOTH FAIBLE ÉNERGIE ® Modèle : WALLSWITCH1A3KEYUNVBLE NAED : 63829 Contrôleur mural à 3 boutons à tension régulière, à installer sur le site. AVERTISSEMENT Veuillez lire toutes les directives avant de débuter l’installation •... -
Page 5: Spécifications Générales
GÉNÉRAL : • Lors de la réception de l'appareil, vérifiez soigneusement qu'il n'y a pas de dommages causés durant le transport et si des dommages sont constatés aviser le transporteur • Couper l’alimentation au fusible ou au panneau de disjoncteurs avant de raccorder les fils de l’appareil à l’alimentation •... -
Page 6: Mise En Service
La marque de mot Bluetooth® et les logos sont des marques déposées propriété de Bluetooth SIG, Inc. et tout utilisation de ces marques par LEDVANCE LLC est sous licence. Toutes les autres marques déposées sont celles de leurs propriétaires respectifs. Les spécifications sont sujettes à changement sans préavis.