Installing The Base - Jole i-Spin Grow Mode D'emploi

Installing the Base

see images -
14 25
!
Insert ISOFIX guides into ISOFIX
anchor points (see vehicle owner's
manual).
14
!
To extend the ISOFIX connectors,
press in and hold the ISOFIX
adjustment button first.
15
13
14
15
1
2
!
Make sure that both ISOFIX
attachments connectors are
securely attached to their ISOFIX
anchor points. The colors of the
indicators on both ISOFIX
connectors should be completely
green.
16
!
Pull on both ISOFIX connectors to
make sure they are securely
connected.
!
Make sure that both two ISOFIX
indicator LEDs turn off after the
ISOFIX connectors are connected.
each LED indicates if the ISOFIX
connector on the same side is
properly connected or not.
17
16
1
17
14