O'Barber HX-G35045100 Guide De L'utilisateur page 26

EN
4.2 Cleaning the blades
In the case of regular use, clean the blades at least once a day.
 Remove the blades as described in § 3.4.
 Clean the inside of the blades with the brush supplied (Fig. 6).
 With your thumb, press on the 2 lugs (arrows Fig. 6) to move the fixed/mobile
cutters. Eliminate all cutting debris and residues stuck between the cutters.
 Lubricate the cutters and put the blades back on the clippers as described in
§ 3.4.
26