SilverCrest STS 12 A1 Mode D'emploi page 45

CAUTION - PROPERTY DAMAGE
► Before you connect the appliance to the power supply,
check to ensure that the required input voltage as given on
the type plate tallies with that for the intended power source.
Check to ensure that the cable for the power adapter 2
►
is not damaged and that it does not lead over hot surfaces
GB
and/or sharp edges, otherwise it could be damaged.
Ensure that the cable for the power adapter 2 is not over-taut
►
or kinked.
Connect the power adapter 2 with the appliance by inserting
♦
the barrel connector 3 into the plug socket 4 at the rear side
of the appliance.
Align the light surface 1 so that the fl icker is visible on the
♦
walls and/or ceiling.
Connect the power adapter 2 into a power socket.
♦
NOTE
► It is best to check the location and alignment of the appliance
in the dark from outdoors and through the window. Only in
this way can you assess whether the appliance is aligned so
that it appears as if someone is watching television inside.
If necessary, realign the appliance.
42
STS 12 A1