6�1 Sensor Menu; 6�2 Ptz Control - Monacor INC-4757PTZ Mode D'emploi

6.1 Sensor menu
To activate the sensor menu (fig . 7), click the
icon .
➆
Sensor menu
Select the mode in the list field at the bottom on
the left . To change the settings, select "Debug
Mode" . The settings made in the sensor menu
(exception: Zoom/Focus) can be saved with
"Save" (Schemes 1 – 4) and retrieved (selection
via second list field) . It is possible to define an
individual validity period for each of the settings
saved (view "Time Segment") . This will allow
you, for example, to make different settings for
day and night .
To reset the settings to the values saved,
click "Reset" . To reset the settings to the factory
settings, click "Factory Setting" .
20
The setup options of the sensor menu can be
found in the table below .
View Setting
Enable
Time
Segment
Start Time
End Time
Brightness
Saturation
Image
Sharpness
Contrast
Scene
Freeze
Scene
Mirror
Exposure Shutter, Gain, Iris exposure settings
WB Mode, Red, Blue white balance
Day Night Mode, IR LED
Noise
3D NR
Reduction
Enhance WDR, HLC, BLC,
Image Defog
Zoom, Focus,
Zoom
Auto focus,
Focus
Digital Zoom
6.2 PTZ control
To control the camera movements and the lens,
click to activate the PTZ window (fig . 8) .
➇
PTZ window
The camera movements are controlled by means
of the arrows arranged in a circle . The control
above the circle is used to define the speed of
movements . The following functions are avail-
able to control the lens:
Function
activation of the validity
period defined for these
settings (Scheme)
start of validity period
end of validity period
brightness
saturation
sharpness
contrast
place of application
"freezing" an image
mirror image: off, horizon-
tal, vertical, horizontal and
vertical
day / night switching,
infrared LED illumination
noise reduction
image enhancement
zoom and focus settings