Baldwin RESERVE Instructions D'installation

BALDWIN
Before You Start
Thesestepsshowyou howto change from thecurrentkeythat operates the lock
to a newkeyyouwantto operatethe lock Fornew purchases, the currentkeyis
the one that was supplied in the box with the purchased ockset.
Be sureto install the product on the door first Also, these steps should be done
while the door is open
These instructions illustrate a deadbolt for demostrationpurposes, but these
SmartKeyrekeying instructionsalso apply to handlesets
front view
EALDWIN
SmartKey
tool hole
BALDW[N
current key
SmaftKeytool
1. Turn to learn position
start position
RESERVE
BALDYnN
new key
insert current key
rotate
1/4 turn
to right
learn position
www.baldwinhardware.com
2. Insert and remove SmartKey tool
SmartKey t ool hole
SmartKeytool
If key does not pull out, return to Step 2a.
3. Learn new key
BALDWIN
finish position
WARNNG:This Manufactureradvisesthat no lock can providecomplete security
by itsef. This ock may be defeated byforcible or technical means,or evadedby
entry elsewhereon the property No ock can substitutefor caution,awarenessof
your environment,and commonsense Bui der's hardwareis availablein mu tiple
performancegradesto suit the application,Inorder to enhancesecurity and reduce
risk, you should consut a qualified locksmithor other security professional.
Copyright0 2011 Baldwin HardwareCorporation
OSMARTKEY
RE-KEY TECHNOLOGY
Installation Instructions
• Customer Service 1.800.437 7448
2a Push tool all the way in
2b Remove tool
2c. Removecurrent key
Be careful not to
rotate when moving
learn position
Fully insert new key
Be careful not to rotate
when inserting
rotate
1/4 turn
to left
remove new key
when finished
47032 / 02