Alarm.Com ADC-VDB755P Guide D'installation

Masquer les pouces

page de 27

/ 27
Signets

Liens rapides

Télécharger ce manuel

Alarm.com PoE Video Door Station (ADC-VDB755P) - Installation Guide

Pre-installation checklist

• ADC-VDB755P video doorbell.

• Video Analytics service package and the Doorbell Cameras add-on

• Ethernet connection to PoE (802.3af) power supply and internet access.

• (Optional) A Wired compatible mechanical or digital chime and wired doorbell transformer.

In the box

• ADC-VDB755P video doorbell

• Wall anchors (x2) & screws (x2)

• Installation card with scannable QR code

https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(...

Updated: Thu, 10 Apr 2025 19:45:08 GMT

Sommaire des Matières pour Alarm.Com ADC-VDB755P

Page 1 Alarm.com PoE Video Door Station (ADC-VDB755P) - Installation Guide Pre-installation checklist • ADC-VDB755P video doorbell. • Video Analytics service package and the Doorbell Cameras add-on • Ethernet connection to PoE (802.3af) power supply and internet access. • (Optional) A Wired compatible mechanical or digital chime and wired doorbell transformer.
Page 2 Install the ADC-VDB755P Expand all To install the ADC-VDB755P 1. If replacing existing doorbell hardware, turn off power to the doorbell circuit (transformer). 2. If installing with an existing chime, remove any existing power modules from the chime. Verify that the chime wire terminals are connected to one wire run from the transformer and one wire run from the doorbell.
Page 3 6. Mount the main assembly to the surface with the provided screws/anchors. 7. If installing chime wires, insert the chime wires into terminals and use a screwdriver to secure them. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 4 9. Gently insert the main assembly into the wall mount assembly, ensuring that wires are not pinched and there is no excess cable in the doorbell. Firmly press the main assembly until it is completely seated. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 5 10. Fasten the security screw at the bottom of the wall mount assembly. 11. If not already completed, connect the Ethernet cable to its source of power. 12. Restore power to the PoE source and chime circuit (if applicable). https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 6 Enroll the video doorbell to the account The ADC-VDB755P can be enrolled to a customer account using the MobileTech app and Customer app. To enroll the video doorbell using the MobileTech app: 1. Log into the MobileTech app. 2. Find the customer account.
Page 7 Blinking red Power on, camera booting Blinking green Local network connection Solid green Connected to Alarm.com Alternating red and green Camera resetting to factory default (press and hold button for 45-50s) Change the chime type to mechanical (press and hold...
Page 8 • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 9 English English Pre-installation checklist • ADC-VDB755P video doorbell. • Video Analytics service package and the Doorbell Cameras add-on • Ethernet connection to PoE (802.3af) power supply and internet access. • (Optional) A Wired compatible mechanical or digital chime and wired doorbell transformer.
Page 10 Install the ADC-VDB755P Expand all To install the ADC-VDB755P 1. If replacing existing doorbell hardware, turn off power to the doorbell circuit (transformer). 2. If installing with an existing chime, remove any existing power modules from the chime. Verify that the chime wire terminals are connected to one wire run from the transformer and one wire run from the doorbell.
Page 11 5. Insert the chime wires (if using) and Ethernet cable through the wall mount assembly wiring cutout. 6. Mount the main assembly to the surface with the provided screws/anchors. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 12 7. If installing chime wires, insert the chime wires into terminals and use a screwdriver to secure them. 8. Connect the Ethernet cable to the Ethernet port on the back of the main assembly. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 13 9. Gently insert the main assembly into the wall mount assembly, ensuring that wires are not pinched and there is no excess cable in the doorbell. Firmly press the main assembly until it is completely seated. 10. Fasten the security screw at the bottom of the wall mount assembly. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 14 12. Restore power to the PoE source and chime circuit (if applicable). Enroll the video doorbell to the account The ADC-VDB755P can be enrolled to a customer account using the MobileTech app and Customer app. To enroll the video doorbell using the MobileTech app: 1.
Page 15 5. Tap ADC-VDB755P. Follow the on-screen instructions. LED status guide LED pattern Description Power off Blinking yellow Camera power cycling Solid red No local or internet connection Blinking red Power on, camera booting Blinking green Local network connection Solid green Connected to Alarm.com...
Page 16 Développement économique Canada applicables aux appareils radio exempt de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 17 équipement doit être installé et utilisé avec une distance minimale de 20 cm (7.9 pouces) entre l’antenne et votre corps pendant le fonctionnement normal. Les utilisateurs doivent suivre les instructions spécifiques d’utilisation pour respecter la conformité à l’exposition aux RF. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 18 • Anclajes de pared (x2) y tornillos (x2) • Tarjeta de instalación con código QR escaneable Instalar el timbre con cámara ADC-VDB755P 1. Si va a reemplazar un timbre de puerta existente, corte la alimentación en el circuito del timbre de puerta (transformador).
Page 19 12. Restablezca la alimentación de la fuente PoE y del circuito de la campanilla (si aplica). Inscribir el timbre con cámara en la cuenta El timbre con cámara ADC-VDB755P se puede inscribir en la cuenta del cliente utilizando la aplicación MobileTech y la aplicación para clientes.
Page 20 No hay conexión de red local o a Internet Rojo intermitente Dispositivo encendido, cámara reiniciándose Alternando rojo y verde Restableciendo cámara a la configuración de fábrica Verde intermitente Conexión de red local https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 21 Patrón de LED Descripción Verde continuo Dispositivo conectado a Alarm.com Avisos • La altura de la instalación del producto debe ser inferior a 2 m (6’ 7”) desde el nivel del suelo y en una orientación vertical. • Temperatura de operación: Desde -50 °C hasta 50 °C (desde -58 °F hasta 122 °F)
Page 22 Lista de verificação de pré-instalação • Campainha com vídeo ADC-VDB755P • Conexão Ethernet à fonte de alimentação PoE (802.3af) e acesso à internet • Campainha mecânica com fio ou campainha digital compatível e transformador de campainha com fio (opcional) Conteúdo da caixa...
Page 23 • Buchas e parafusos (×2) • Instruções de instalação com código QR Instale a ADC-VDB755P 1. Se estiver substituindo a campainha existente, desligue o circuito da campainha (transformador). 2. Se estiver instalando com uma campainha existente, remova todos os módulos de alimentação da campainha.
Page 24 12. Restaure a alimentação no circuito da campainha e da fonte PoE (se aplicável). Inclua a campainha com vídeo na conta Para incluir a campainha com câmera ADC-VDB755P a uma conta de cliente, é possível usar o aplicativo MobileTech e o aplicativo do cliente.
Page 25 Pisca em verde Conexão à rede local Permanece aceso em verde Conexão à Alarm.com Avisos • O produto deve ser instalado a, no máximo, 2 metros do chão e na vertical. • Temperatura de funcionamento: de -50 a 50 °C (de -58 a 122 °F) https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(…...
Page 26 2. esse dispositivo deve aceitar qualquer tipo de interferência recebida, inclusive interferências que possam causar funcionamento indesejado. Alterações ou modificações sem aprovação expressa da parte responsável pela conformidade podem resultar na proibição de operação desse equipamento por parte do usuário. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...
Page 27 ISED, esse equipamento deve ser instalado e operado a uma distância mínima de 20 cm (7,9 polegadas) da antena e de seu corpo durante a operação normal. Os usuários devem seguir instruções de uso específicas para manter a conformidade com os limites de exposição à RF. https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_PoE_Video_Door_Station_(… Updated: Thu, 10 Apr 2025 19:45:08 GMT...