Télécharger Imprimer la page

Liens rapides

Ø80
(Ø3 5/32")
PTR27
KEY17
5
(13/64")
TRM08
_ REV14
TRM08/GIO
AISI 316L STAINLESS STEEL
Miscelatore termostatico a parete con Acqua Stop System
Wall mounted thermostatic mixer with Acqua Stop System
CEADESIGN STUDIO
Alta portata (≥ 25 l/min)
High water flow (≥ 25 l/min / ≥ 6.6 gpm)
Prodotto che necessita di parte incasso
Product that needs built-in part
Staffa ausiliaria per cartongesso / fibrogesso
Auxiliary bracket for plasterboard / fiber-board structures
Chiave per pulizia dell'impianto
Key for cleaning out the water system
MANUTENZIONE / MAINTENANCE
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
NON UTILIZZARE
HF
DO NOT USE
hydrofluoric acid
ipoclorito di sodio
NaCl O
chlorine bleach
detergente a pH neutro
UTILIZZARE
pH
TO USE
7
neutral pH detergent
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
PTR
SYSTEM
ceadesign.it
loading

Sommaire des Matières pour CEA GIO TRM08

  • Page 1 TRM08 Ø80 (Ø3 5/32”) _ REV14 (13/64”) SYSTEM TRM08/GIO AISI 316L STAINLESS STEEL Miscelatore termostatico a parete con Acqua Stop System Wall mounted thermostatic mixer with Acqua Stop System CEADESIGN STUDIO PTR27 Alta portata (≥ 25 l/min) High water flow (≥ 25 l/min / ≥ 6.6 gpm) KEY17 Prodotto che necessita di parte incasso Product that needs built-in part...
  • Page 2 TRM08 _ REV14 SYSTEM AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio ed evitare sbalzi di pressione fra i raccordi d’acqua fredda e d’acqua calda. In caso di pressioni statiche superiori a 5 bar si raccomanda l’installazione di un riduttore di pressione per evitare danni alla cartuccia.
  • Page 3 TRM08 _ REV14 SYSTEM RICAMBI / SPARE PARTS RICB034 Carter / Carter RICM116 Maniglia / Handle RICM118 Maniglia / Handle RICR016 Rosetta / Rosette Conservare gli strumenti inclusi nel prodotto e utilizzati per l’installazione perchè riutilizzabili per i ricambi. Please, keep the tools included in the item pack and employed for its installation, to re-used them for the spare parts.