NEO SMART BLINDS SP-2/11 Guide Rapide

SMART BLINDS
NEO SOLAR
Getting to know your Solar Panel
solar cells
front
Caution
• Ensure all cables and connected
clear from moving parts.
• Misuse or any design modification will void the warranty.
Technical specification
Dimensions: 360x40x10 mm (18x1%x3/8 in)
Electrical parameters:
SP-2/11
Current: 181mA
Maximum power output: 2W
Voltage: IIV
For indoor use only
Choosing the right place
Disclaimer
Before installing, determine if and where the solar panel will have a clear
line of the southern sky. Choose the window side and location that
receives the most sunlight, especially during the winter months.
Windows facing the north side will provide
An obstruction such as stained or tinted glass, large constructions
trees may cause the sunlight to be blocked for significant
day. All these factors will significantly
charge your motor's battery.
The use of a solar panel is intended to extend
the time between battery charges. We do not
guarantee that eventual charges using
an external charger will not be necessary.
Product Information
For detailed information and instructions
other products, visit our website
Help Center at help.neosmartblinds.com/portal/.
If you need additional assistance, detailed
bleshooting help, please contact our technical support team at
tech@neosmartblinds.com.
PANEL
brackets
solar panel
connector
back
devices are protected
SP-2/15
Current: 133mA
Maximum power output:
Voltage: 15V
less charge than the south.
parts of the
affect the solar panel's capacity to
and Support
on our motors and
at neosmartblinds.com
instructions, or trou-
Solar Panel
The solar panel must be within
tion located on the motor head when selecting a place to mount.
solar panel connection
For motors with an external battery, select a position to install
the battery that can be reached by both the solar panel and the
motor.
and
If the solar panel's cable is too short for the chosen location,
connect the provided
panel's cable.
Attach the 2 provided
(25 cm) apart from each other. You can install it to the top or
side of the window
motor position (left or right), the available space and maximum
sunlight exposure possible.
2W
10 in
25 cm
and
Once the mounts are attached to the frame, install the solar
panel dark side facing out and connect the cable to the solar
panel connection.
Troubleshooting
I have a solar panel and my battery blind stopped working
Check the solar panel connections to the motor or external
battery and charge your blind's battery for a few hours using an
external charger. Charging the motor might be necessary from
time to time. Please read the section "Choosing the right place"
If the blind does not start working,
or our
Disposal
Do not dispose of the solar panel with your regular waste. Please
follow local regulations.
sp-2/11,
installation
reach of the solar panel connec
tubular motor
external battery for a curtain motor
extension cable in series with the solar
brackets to the window
frame. Decide the best position
i 25 cm
example of installation to the top and side of the window frame
contact technical
sp-2/15
ENGLISH
version 2.1
inside a roller blind
solar panel
connection
frame 10 inches
based on the
10 in
support.