Technical Data - Kerbl Clipster DropiX Mode D'emploi

5. Troubleshooting
What to do, when...
... the device cannot be switched on?
• is the battery empty? Connect the power pack and charge the clippers
• is the clipping head dry? The clipping head must be oiled
... the clipping head does not operate smoothly?
• the clipping head must be oiled
• the top and bottom blades can become stuck when not in use for longer periods of time
... the charging display does not light up when charging?
• make sure that the power pack is connected properly
... the device switches off by itself?
• the battery is empty. Charge the clippers
... the battery can no longer be charged?
• the battery or the power pack is defective. The power pack can be re-ordered. If the battery is defective, then the device must be
disposed of properly.

6. Technical data

Art. No.
Motor speed
Charging time
Shearing time
Weight
Input voltage
Frequency
Battery capacity
Current consumption
Ambient temperature charging process/use
Protection class
IP Protection type
Clipper Power pack
18461 18494
6000 rpm -
60 min -
60 min -
197 g 69 g
5V DC 100-240 V
- 50/60 Hz
600 mAh -
max. 2000 mA 0,2 A
0°C - 40 °C 0°C - 40 °C
III II
IPX7 IPX0
13