Continuous Drain Instructions - Danby Premiere DDR5009REE Guide D'utilisation Et Soins De Propriètaire

INSTALLING PVC
DRAIN HOSE
CONTINUOUS
DRAIN The function of continuous drain can be performed using the following steps:
1) To save having to periodically empty the water tank, this unit
can be configured for continuous drain. You can use the supplied
drain hose to connect to the continuous drain connector.
2) Unscrew and remove the drain cover at the rear of the unit.
3) Remove the soft rubber stopper, and place it in the water
tank for safe keeping.
7) Tighten the drain cover in clockwise direction onto the rear of
the unit.
8) Place the bucket in its original location.

CONTINUOUS DRAIN INSTRUCTIONS

When using the continuous drain function, the PVC hose must be placed horizontally
below the drainage hole. Avoid uneven ground and folding the hose. NOTE: Should you
damage or misplace the pvc drain hose, a standard garden hose can be used.
4) Insert the drain hose through the hole of the drain cover.
5) Ensure the rubber seal ring is properly seated in the end
of the hose as shown here.
6) Connect the drain hose to the drain port.
10