T&S P-HOP-1 Manuel Du Propriétaire

T & S Equipment
2999 North Wayne St., Angola, 'IN 46703
Ph: 219-665-9521
Website: www.tseq.com
e s
Oper tr g
OPERATION INSTRUCTIONS
This unit is designed to be used with or without the aid
of a forklift. To dump Hopper...
1.) Position hopper as close to dumpster as possible.
2.) Adjust safety chains so all debris will slide out
of hopper.
3.) Push down on hopper handle, and release latch.
Hopper will tip forward.
4.) After dumping pull down on handle until release lever
is latched.
5.) Shorten safety chains to prevent accidental
dumping.
WARRANTY
This product is warranted for 90 DAYS from date
of purchase to be free of manufacturing defects in
material and workmanship.
obligation hereunderis limited to repairing such products
during the warranty period, provided the product is sent
prepaid back to the factory.
This warranty does not cover normal wear of
parts or damage resulting from any of the following:
negligent use or misuse of the product, use or application
contrary to installation instructions, or disassembly,
repair or alteration by any person prior to authorization
from a factory representative.
Company
Fax (219)665-1339
E-mail: sales@tseq.com
The manufacturer's
Revised 04-01
A company dedicated to solving ergonomic and material
handling problems since 1955.
OWNERS
MANUAL
PORTABLE STEEL HOPPERS
MODEL P-HOP-I & P-HOP.1.5
PARTS LIST
Model P-HOP-I & P-HOP-1.5
ITEM NO. PART NO.
1 37-537-002
2 37-146-002
3 16-132-076
4 16-132-034
5 16-132-037
6 37-112-001
7 65080
16-112-010
8
9
10 37024
21373
11
12 37024
6 37-112-002
PORTABLE
MODEL P-HOP-I
DESCRIPTION
Latch Assembly
Latch Spring
Rigid Wheel
Swivel Caster
Locking Swivel Caster
Pivot Pin
Cotter Pin
Wheel Axle
Latch Bolt
Latch Nut
Swivel Caster Bolt
Swivel Caster Nut
Chute Pivot Pin
(for Model P-HOP-1.5)
STEEL HOPPERS
& P-HOP-1.5