Putting Into Operation; Ventilation; Humidity; Exposure To Sunlight, Heat - Kathrein DCM 32 Mode D'emploi

Masquer les pouces Voir aussi pour DCM 32:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Putting into operation

Putting into operation

Ventilation

Humidity

Exposure to sunlight, heat

22
Every electronic device generates heat. The rise
in temperature, however, lies within a safe range.
Slight colour changes may occur to sensitive fur-
niture surfaces and veneers over the course of
time due to the constant effect of heat. Colour
changes may also be brought about if the unit's
feet are in contact with treated furniture surfaces.
Place the modem on a suitable smooth pad
where necessary.
The heat generated in the modem is dissipated
quite adequately. Nevertheless, never install it in
a cabinet, shelf or rack with inadequate ventila-
tion. The clearance above the unit should be at
least 5 cm. Never close off the openings on the
unit intended for heat dissipation.
Do not place any objects on top of the modem.
Protect the modem against humidity, drips and
splashes. Never operate it in damp locations.
Do not place the modem close to radiators nor
where it will be exposed to direct sunlight.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dcm 42Dcm 42 i262100422621004326210044

Table des Matières