Marathon CL030062 Manuel Utilisateur

USER MANUAL
MARATHON
CL030062
Slim Jumbo Atomic Digital Clock
Power 4 x AA Batteries
14.5in w x D x 9in
Dimensions
37trn W x D x 23tm
BEFORE FIRST USE
Please read the instruction manual carefully and keep it for
future reference. This information will help you to familiarize
yourself with your new clock.
The product should only be used as described within these
instructions. Unauthorized repairs, modification or changes
to the product are prohibited. This product is intended for
home use only.
UNIT APPEARANCE
AM
: 51.]N60
12
Time display ALARM" button
Indoor temperature Wall mount
Date, day of week 4/12/24" buton
O
Radio controlled time
Indoor humidity
"RESET" button
"MODE" button Battery compartment
"SNOOZE" button Stand
FEATURES
Radiocontrolled time with manualsetting option
perpetual calendar up to year 2069
12/24 hour time display
OC/OF temperature display
Indoor measurable temperature: 320F(OOC)to 1220
Indoor measurable humidity: 20% to 99%
BATTERY
Open the battery compartment and insert 4 AA size
H
batteries following the correct polarity. Once done,
snap the cover back in. The clock is now ready for use.
TIME & ALARM
RADIO CONTROLLED
After the start-up of the unit, the clock automatically
starts to scan for the radio time signal.
Radio C ontrolled Icon ( @ ) flashes o nthescreen.
flashes:
Theclock automatically synchronizeswith the radio
signal every day at 2:00am to maintain accurate time
keeping. If synchronizationwith the radio signal
fails, @ ondisplay w ill disappear andtheclock will then
reattempt to synchronizewith the radio signal at 3:00am,
4:00am
The clock can be forced to scan for the radio signal
manually byholdingthe @ buttonfor 3 seconds. Each
8 O
reception can take several minutes. If the signal reception
fails,scanning stops( @ will disappear f romthe display).
Stop the unit from scanning for the radio signal
byholdingthe @ buttonfor 3 seconds.
"DST" is shown on the display if it is
in Daylight SavingTime Mode
Note:
Buttons will not function while scanning for time signal.
6 7 8
MANUAL
In time display mode, hold "MODE" button for
3 secondsto enter Clock/Calendar s etting mode.
Press "*" or "-" button to adjust the setting and press
"MODE" button to confirm each setting. (By keeping
the "+" or
of scroll in order to get to the desired value quicker).
The manual setting sequence is as follows: Hour, Minute,
Second, Year, Month/Day sequence, Month, Date, DST.
Note:
ManualSetting mode will automaticallyexit
after 15 seconds if no adjustment is made.
ForTime Zone:the default setting is zone"E" (Eastern
Standard Time). Hold "4" button for 3 seconds to adjust
hole
to other zones "p" (pacific Standard Time) "M" (Mountain
Standard Time) or "C" (Central Standard Time)
button
DST: When DST function
zone is observing Daylight Savings Time (RCCsignal with
DST)"DST" will be shown on the display.
F(500C)
INSTALLATION
SETTING
CLOCK
Turns Oissapears:
ind.cates signl
the 'adio been sucæsfully
and
TIME SETTING
button pressed, will accelerate the rate
is activated and the selected
DAILY ALARM SETTING
Press "MODE" button to view the alarm time.
Whenviewing Alarm Time, hold"MODE" button for
3 seconds to enter Alarm Time setting mode. Press"+"
" button to adjust the hour. Press"MODE" button to
confirm the hour setting. Press"+" or "-" button to adjust
the minutes. Press "MODE" button to confirm
time and exit alarm setup mode.
SNOOZE/ALARM FUNCTION
Press the "ALARM" button to activate
the alarm function.
function is activated.
When alarm sounds, press any button to stop the
alarm. Otherwise, the alarm will stop automatically
after approximately 2 minutes.
Press "SNOOZE" button
Alarm will sound again in 5 minutes. Z
display during the snooze time. Press"SNOOZE"button
to activate the snoozefunction again when alarm sounds.
Pressany button (except "SNOOZE") t o stop the snooze alarm.
HOUR DISPLAY MODE
Press"12/24" button to select 12 or 24 hour display mode.
THERMOMETER
Press "OC/OF"button to switch
between celsius and fahrenheit.
If the temperature is out of the measurable range, LL.L
(beyond the minimum temperature) or HH.H (beyond the
maximum temperature) will be shown on the display.
SAFETY
The clock loses its time
when the battery is removed.
Do not expose unit to direct sunlight,
high heat, cold, high humidity or liquids.
Never clean the device using abrasive
or corrosive materials or products.
Abrasive cleaning agents may scratch plastic
parts and/or corrodeelectronic circuits
time
Marathon Watch Company Ltd.
Richmond Hill, ON Canada 14B 185
www.MarathonWatch.com
SKU#: CL030062
Designed in Canada / Conqu au Canada
Made in China / Fabriqué en Chine
the alarm
or deactivate
appears on the display if alarm
when alarm sounds to snooze.
flashes on the
information