EIBENSTOCK EHR 23/2.5 S Notice Originale page 11

Technical Data
Stirrer EHR 23 / 2.5 S
Rated voltage:
Rated power input:
Rated current:
Frequency:
No Load Speed:
Load Speed:
Max. basket diameter:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Order number:
Interference suppression:
Available accessories:
Helicon Ribbon Stirring Rod WG 160
Mortar Stirring Rod MG160
Mortar Stirring Rod Stainless-Steel MGV 160
Mortar Stirring Rod MG 180
Disc Stirring Rod SG 150
Mixing Paddle RPG 160
... with M 14 thread connection
Stirrer with stirring rod and operating instructions in a set box
Application for Indented Purpose
The Stirrer EHR 23 / 2.5 S is designed for use in mixing material of high viscosity,
such as prefab mortar and plaster, cement, lime, concrete, quartz-filled epoxy
resins, screed, pastes, sealing compounds as well as gypsum and granulates in
batches up to 80 kg.
The diameter of the used stirring rods should not exceed 180 mm.
Item
Supply
230 V ~
1800 W
8,3 A
I 440 rpm
II 970 rpm
I 0 – 250 rpm
II 0 – 580 rpm
EN 55014 and EN 61000
10
110 V ~
1600 W
15.5 A
50 - 60 Hz
450 rpm
1000 rpm
0 – 210 rpm
0 – 480 rpm
180 mm
M 14
II
IP 20
about. 6,9 kg
077E3000
Order no.
31227000
31327000
31427000
31328000
31527000
31437000