Hawke SMARTPHONE ADAPTER Mode D'emploi page 2

INSTALLATION
1. Gently squeeze the outer handles of the smartphone adapter to expand the opening.
2. Position the adapter over the eyepiece of your optical device and slowly release the outer handles to
securely lock the adapter in place.
3. Insert your smartphone into the adjustable phone clamp.
4. Adjust the position of your smartphone by moving it up, down, left, and right to align its camera with the
optical device.
5. Tighten the screw located above the smartphone clamp by rotating it clockwise to firmly secure the
phone in place.
6. Rotate the smartphone clamp 90º in either direction to switch between portrait and landscape
orientations.
NOTES
• Use a tripod with your optical device to ensure stable viewing.
• Avoid holding the smartphone without supporting the optical device.
• For a full screen image, zoom in on your phone's camera.
• Make sure the eye cups of the optical device are in the down position to allow the smartphone to be as
close as possible; fold down any rubber eye cups.
• When using optical devices with small eyepieces, utilize the large foam spacer on the inner opening
(optical device side).
• For smartphones with raised cameras, place the small foam pads on either side of the adapter's opening
(smartphone side).