Remote Control Function - Wagan Tech Solar + LED Floodlight 1000 Guide D'utilisation

Solar + LED Floodlight 1000 by Wagan Tech

REMOTE CONTROL FUNCTION

Use the remote control to temporarily bypass the PIR motion detection mode or
manually turn the light on or off.
Press this button to turn the light on or off.
With the light on, press this button to activate the timer mode for either
1 or 2 hours. The light will be automatically set to 500 lumens. When
choosing 1 hour mode (one press), 1 red LED indicator will turn on. When
choosing 2 hour mode (two presses), 2 red LED indicators will turn on. The
red LED indicators turn off after 5 seconds.
Press this button to choose between 50% (500 lumens) and 100% (1000
lumens) brightness for the duration selected previously. During the timer
mode, the PIR motion detection is turned off.
• The timer mode ends automatically at the end of the timer period and returns
to normal mode (150 lumen standard/500 lumen motion detection). To
manually cancel the timer mode, press the button for about 2 seconds. Both
red LED indicators will flash 3 times.
• The remote control uses 2 AAA batteries (not included)
7
www.wagan.com
®