Whirlpool WDT730HAMZ Guide De Démarrage Rapide

QUICK START GUIDE WHIRLPOOL
Find your QR code on
your product's serial tag,
as shown in the diagram.
WARNING
Tip Over Hazard
Do not use dishwasher until completely
installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the Installation, User Maintenance and Operating
Instructions printed and online before installing or operating this
appliance.
SANITIZATION
CYCLES
Sanitized Cycles sanitizes
dishes and glassware in
accordance with NSF
International NSF/ANSI
Standard 184 for Residential
Dishwashers. Certified
residential dishwashers are
not intended for licensed
food establishments. Only
sanitizing cycles have been
designed to meet the
requirements of the
NSF/ANSI 184 performance
standard for soil removal and
for sanitization efficacy.
There is no intention, either
directly or indirectly, that all
cycles on a NSF/ANSI 184
certified dishwasher meet the
NSF/ANSI 184 performance
standard for soil removal and
for sanitization efficacy.
W11775118A
PRODUCT REGISTRATION & OWNER INFORMATION
YOUR QR CODE UNLOCKS... product registration and warranty information, installation instructions, how-to videos,
and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will
provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and
Operating Instructions, Warranty details, and more by visiting our website at www.whirlpool.com/owners or
www.whirlpool.com/owners.This may save you the cost of a service call. To receive a free printed copy of the
information online, call us at 1-866-698-2538 (U.S.A.) /1-800-807-6777 (Canada) or write to us at:
Whirlpool Customer Service
PO Box #8
St. Joseph, MI 49085
Register to access warranty information and receive important notifications related to your product. Scan the Photo
Registration Card or QR code to register your product.
WARNING: To reduce the risk of fire, electric shock, or injury to person, read the Important Safety Instructions located in
the Safety and Installation Instructions provided before installing or operating this appliance.
OPERATING INSTRUCTIONS
1
Top Rack Lower Rack
Toss and Go Rack
Prepare and Load the
Dishwasher
NOTE: Racks vary by model.
2
Add Detergent and Rinse Aid (as needed)
to the Dishwasher.
3
Check that All Arms Spin Freely (Items in
the rack can block the spray arms.)
4
CYCLES
Express Rinse
ProWash Tough Normal
Wash Only
Select the desired Cycle for your load.
USER-MAINTENANCE INSTRUCTIONS
Filter Cleaning
Filters should be removed and cleaned every
1–3 months for best performance. To remove
filter, pull out lower rack, grasp Filter Cup and
rotate it 1/4 turn counterclockwise. Pull up to
remove. Remove the Filter Plate. Rinse both
under cold water in sink. A soft brush can be
used to remove stuck on food. Replace filter
plate. Ensure filter plate is correctly seated
under tabs. To install filter cup, push down
through opening. Turn clockwise to seat. Filter
cup will click in to place when seated properly.
Do not operate dishwasher with loose or
missing filters.
®
DISHWASHER
Whirlpool Brand Home Appliances
Customer eXperience Center Unit
200-6750 Century Ave.
Mississauga,Ontario L5N 0B7
5
OPTIONS
Hi Temp Sani
Wash Rinse
Select Additional Options.
6
Start
RESUME
Start/Resume Cycle. Close the door within
4 seconds for top control models.
Additional Loading tips
NOTE: Not all cycles, options, and features
are available on all models. Appearance may
vary.
2-4-8 Hr
Heat Dry
Delay
Extended
Cancel
DRAIN