Anker SOLIX F2600 Mode D'emploi page 4

Powering Your Devices
Power Saving Mode
Turning on the Power Saving mode prevents wasting energy as it automatically turns o the power station once
all your devices are fully charged.
Turning o the Power Saving mode will enable stable charging over an extended period, such as for time-lapse
photography or when using a CPAP machine overnight.
The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power wastage by
automatically turning o the power station if no plug is detected for more than 15 minutes, whether the Power
Saving mode is turned on or o .
AC Charging
Press the AC outlet button and connect your devices to the AC output ports.
USB Charging
Connect your devices to the USB ports.
Car Socket Charging
Turn on the car socket and connect your devices to start charging.
on / o
03 EN
Uninterruptible Power Supply (UPS)
To use the UPS feature, connect your power station to a wall outlet with the AC charging cable. Then, press the
AC outlet button and connect your devices via the AC output ports. With the UPS connection, your devices will be
powered via bypass charging.
on / o
Connect with an Expansion Battery
Your power station can be connected with an expansion battery. Please refer to the user manual of Anker
Expansion Battery for detailed instructions.
The Anker App for Smart Control
You can remotely control your power station using the Anker App. Please download the app and its user manual
by scanning this QR code.
Connect the device to a network before using the app for the first time. After connecting successfully, you can
connect your devices o -grid.
on
EN 04