Télécharger Imprimer la page
HOMCOM 830-761V80GN Mode D'emploi
HOMCOM 830-761V80GN Mode D'emploi

HOMCOM 830-761V80GN Mode D'emploi

Liens rapides

IN230400286V01_US_CA
3ZT
loading

Sommaire des Matières pour HOMCOM 830-761V80GN

  • Page 1 IN230400286V01_US_CA...
  • Page 2 Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use. Warning This tree is for INDOOR use ONLY. The tree base MUST be placed on a flat rigid surface. 1.For indoor use only, Do not use outcoors or in moist/humid conditions.
  • Page 3 PART NOTE:Please remove the circular protector caps on the end of each pole before assembling. If the caps were broken, It will not affect the use of. FR_REMARQUE :Veuillez retirer les capuchons de protection circulaires à l'extré mité de chaque tige avant de les assembler. Si les capuchons sont cassés, cela n'affectera en rien l'utilisation du produit.
  • Page 4 EN_Connect all the corresponding plugs. FR_Branchez toutes les fiches correspondantes. Shaping Your Tree Please assemble the tree with glove. Start at the bottom of the tree and ensure that each branch has fallen fully into place. Carefully adjust any branches as needed to evenly space them. With each branch, separate out the individual tips and angle them out and away from the center of the tree.

Ce manuel est également adapté pour:

830-761v81gn