Safety Signs; Identification Label; Main Components - Atco 39 EASY CLEAN 100C E QF Manuel D'utilisation

• Using the cutting means on
surfaces other than grass.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.

3.2 SAFETY SIGNS

The machine has various symbols on it (fig.
3). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING! Read the
instruction manual carefully
before using the machine.
WARNING! Beware of any objects
left lying around. Beware of any
persons in the work area.
WARNING! Disconnect the key and
read the instructions before carrying
out any maintenance or repair work.
WARNING! Never put hands
or feet under the guard whilst
the machine is running
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.

3.3 IDENTIFICATION LABEL

The identification label holds
the following data (fig. 1):
1. Trademark
2. Manufacturer's address
3. Model
4. Type of machine
5. Accessory description
6. Weight in kg
7. Year of manufacture
8. Serial number
9. Article code
10. CE conformity marking
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.

3.4 MAIN COMPONENTS

The unit consists of the following
main components (fig. 1):
A. Support arms
B. Canvas guard
C. Canvas guard support chassis
D. Wheels
E. "Quick Flip" release knobs
F. "Quick Flip" release levers
G. Cutting-means assembly transmission belt
H. Cutting height indicator
I. Power cable connector
J. Cutting means
Components of the front deck ride-on mower:
K. Quick release supports
L. Accessory lifting hook
M. Power socket
4. ASSEMBLY
IMPORTANT The safety regulations to
follow during machine use are described
in chapter 2. Strictly comply with these
instructions to avoid serious risks or hazards.
EN - 4