Before First Use - Princess Raclette Purify Manuel De L'utilisateur

1. Put the bottom baking plate into the low slot of the main body.
2. Insert the heating element into the other slot of the main body.
3. Fix the screw to tighten the heating element.
4. Place the stabilizer of the heating elements tightly into the bottom baking plate.
5. Put the top baking plate on top of the heating element.
Filter
For replacement, its recommended to buy an aftermarket filter A
filters are commonly used for kitchen hoods. Before replacement, make sure to cut the new filter to the same
size as the original (max size 16cm x 4cm, max thickness 1cm)

BEFORE FIRST USE

• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the
device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket.
Turn the temperature control knob A
•
for at least 5 minutes without food.
• When the device is turned on for the first time, a slight odour will occur. This is normal. To ensure
adequate ventilation, turn the ventilation control knob A
ventilation. The fragrance is only temporary and will disappear soon.
• We advise to place a heat resistant coating between your table and the appliance (this way you don't
get burn marks on your table or table cloth).
USE
Using the baking plate
• The baking plate(s) A
3
• Pre-heat your appliance on the highest level for 5 minutes before using it.
Use the temperature knob A
•
• The indicator light A
6
temperature has been reached.
• Use the ventilation knob A
© Princess | Raclette Purify
2
1
clockwise to the highest setting and allow the device to heat up
5
should be rubbed in with some food oil.
on the thermostat to choose the desired temperature.
5
will be on while the appliance is heating up and will go out when the desired
to choose the desired ventilation strength.
7
8
3 5
4
with activated carbon. These type of
9
clockwise to turn on the device's built-in
7
| 01.162660.01.001