LF Allen + Roth ODP101BR Instructions page 5

ASSEMBLY INSTRUCTIONS
2. Remove the preassembled ribbon (or tie) holding
the power cord of fixture (A) in place. Insert
branches (C) into the opening at the top of fixture
(A), making sure to align the tabs located on the
tube at the end of branches (C) with the slots in
the opening at the top of fixture (A).
Turn branches (C) clockwise 90° to lock them in
position on top of fixture (A).
3. Plug power supply adapter (E) into wall outlet.
4. Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
2
A
3
4
5
Tabs
C
A
Lowes.com/allenandroth
Slots
E