Intermatic E200DIN Mode D'emploi
  1. Manuels
  2. Marques
  3. Intermatic Manuels
  4. Rangements
  5. E200DIN
  6. Mode d'emploi
Intermatic E200DIN Mode D'emploi

Intermatic E200DIN Mode D'emploi

Masquer les pouces
1
2
3
4
5
6
Les langues disponibles

Les langues disponibles

Table des Matières

E200DIN Outdoor Enclosures
E200DIN Outdoor Enclosure
Risk of Fire or Electric Shock
WARNING
• Bonding between conduit connections is not automatic and must be provided as part of the installation.
• For outdoor locations or wet locations (rain-tight), conduit hubs that comply with requirements of the UL514B (standard for
fitting conduit and outlet boxes) are to be used.
DESCRIPTION:
The E200DIN, is an outdoor rated plastic
enclosure which provides mounting for most
Grässlin DIN rail electromechanical and
electronic time switches. These enclosures are
also well-suited for use as enclosures for pool
controls, relays, contactors, and other DIN rail
mounted control or electrical mechanisms.
T h e E2 0 0 DI N i s T YP E 3R "R a i n p r o o f "
rated for outdoor and wet or dusty locations.
Provision for interior cover panel is provided.
FEATURES:
• Integrated DIN rail
• Attractive appearance
• Outdoor Enclosure, color: Dark Gray
• High impact all-plastic enclosure eliminates rust and
corrosion
• Rugged heavy duty construction
• Secure, easy to operate latch
• Provision for padlock or seal
• Five combination 1/2" and 3/4" knockouts
Table des Matières
loading

Sommaire des Matières pour Intermatic E200DIN

  • Page 1 • For outdoor locations or wet locations (rain-tight), conduit hubs that comply with requirements of the UL514B (standard for fitting conduit and outlet boxes) are to be used. DESCRIPTION: The E200DIN, is an outdoor rated plastic enclosure which provides mounting for most Grässlin DIN rail electromechanical and electronic time switches.

  • Page 2: Dimensions

    INSTALLATION: 1. Mount Intermatic Time Control within enclosure. 2. Select knockouts to be used. Remove the inner (1/2”) knockout by inserting a screwdriver in the slot and carefully punch knockout loose. Remove slug. If the 3/4” knockout is required, remove the outer ring with pliers after removing the 1/2”...

  • Page 3: Boîtiers Extérieurs E200Din

    DESCRIPTION : Le modèle E200DIN est un boîtier extérieur e n p l a s t i q u e q u i p e r m e t l e m o n t a g e d e minuteries électroniques et électromécaniques...
  • Page 4 Fond, intérieur : 191 x 114 x 51 mm (7,5 x 5,5 x 1,4 po) de profondeur MISE À LA TERRE : Les minuteries Intermatic et ce boîtier Couvercle, extérieur : 221 x 140 x 36 mm (8,7 x 5,5 x 1,4 po) de profondeur sont fabriqués en plastique et ne nécessitent pas de Poids : 450 g (1 lb)

  • Page 5: Características

    • Para lugares exteriores o húmedos (resistentes a la lluvia), se usarán conductos que cumplan con los requisitos de la UL514B (norma para instalaciones de conductos y cajas de salida). DESCRIPCIÓN: E200DIN, es una caja plástica para exteriores que permite el montaje de la mayoría de los interruptores de temporizadores electrónicos y electromecánicos en carril DIN de Grässlin.

  • Page 6: Conexión A Tierra

    INSTALACIÓN: 1. Monte el control de tiempo Intermatic dentro de la caja. 2. Seleccione los orificios ciegos que va a usar. Para retirar un orificio ciego interno (1/2"), inserte un destornillador en la ranura del orificio ciego y golpee cuidadosamente para soltarlo.

Table des Matières