Publicité
WIRING
UNILEDBAR can operate :
•
On a 12V battery
•
On a 24V battery
•
On a DC voltage between 9V and 30V
OPERATING
Models with integrated switch:
Switch on/off light: slightly press touch button
Light adjustment: keep touch button pressed until wanted beam.
Model without integrated switch:
Switch on/off: press on your remote switch
Light adjustment: possible if the switch has this function.
TROUBLESHOOTING, CAUSES, SOLUTIONS
Error message
Light does not switch on
•
Red cable to be connected on positive (+) terminal
•
Black cable to be connected on negative (-) terminal
Causes
Battery load < 9V
Wrong wiring
www.uniteck.fr
Solution
Charge your battery.
LED light operates only when
the battery voltage is
minimum 9V.
Check your electrical
connections (polarity, crimp)
EN
10
Publicité
