Kasanova KOE000023 Manuel D'instruction page 11

ELECTRIC FIREPLACE
MAINTENANCE
-
It is essential to prevent the accumulation of dust
-
Do not store in dusty environments
-
Do not carry out any maintenance work on the device yourself; do not di-
smantle any part of the appliance
DISPOSAL
Given that this is electronic waste, dispose of this appliance at the end of its
useful life is to be in accordance with all applicable eu directives and local laws
and regulations. Do not dispose of the appliance with ordinary household waste.
INTENDED USE
This is and emulation flame electric fireplace. Thee theory of the product is to
use a fan to flow the hot air heated by the heating elements in order to achieve
the effect of indoor heating.
MODE OF OPERATION
1. Power on or off with flame effect
2. Provides 800 Watts of heat output operation.
3. Provides 1500 Watts of heat output operation.( can not operate without press
switch 2)
4. Thermostat control knob (TEMPERATURE SETTING)
OVERHEATING SAFE DEVICE
If the heater stops working,turn the heater off and inspect the blockage of inlet
or outlet. Disconnect the plug and wait at least 10 minutes for the protection
system to reset before attempting to restart the heater. If the safe device still
switches the heater off and make the heater fail to operate, take the heater to
your nearest service canter for examination or repair.
Attention: before restarting the heater, the plug must be disconnected for at
least 10 minutes.
11