König Electronic CMP-NWIPCAM21 Mode D'emploi page 6

Figure 3
• Fill in Fixed IP Address as below. (If you do not know your fixed IP address, please contact your ISP. Below is an
example of Fixed IP Address modification.)
Example:
1. Set up the IP CAM with fixed IP address.
2. Turn on your computer and open IE browser. Type 211.78.174.94: (1025` 1026` 1039....) in the Address line. Now you
can access the monitoring screen of the network.
3. Key in Account: admin
Step 1. Click Update. You can see 255IP CAM.
Step 2. Click 255IP CAM. You can see
Name : IP CAM
IP : 192 168.9.1
SubMask : 255.255.255.0
GateWay : 192.168.9.254
HTTP Port : Http communication port. The
default setting is 80.
(If you have multiple IP-CAMs installed in the
same network, you have to divide them with different
Port numbers, e.g, 1025; 1026; 1039....)
UDP Port : UDP port, Pre-setting is 1500
Step 3. Make sure the IP setting is STATIC.
Step 4. Type Fixed IP.
Name : IP CAM
IP : 211.78.174.94
SubMask : 255.255.255.248
Gateway : 211.78.174.89
HTTP Port : Http communication port. The
default setting is 80.
(If you have multiple IP-CAMs installed in the
same network, you have to divide them with different
Port numbers, e.g, 1025; 1026; 1039......)
UDP Port : UDP port, Pre-setting is 1500
Step 5. Choose STATIC.
Step 6. After finishing the settings, click Submit. The
network settings for IP CAM IP-CAM will be
Password: Password
6