Broan InVent AR110PS Directives D'installation, D'utilisation Et D'entretien page 5

8. Install blower.
Re-install blower. Secure blower with 2 screws from parts
bag and plug blower into black receptacle.
9. Finish ceiling, then install grille.
Plug light into receptacle in housing. Attach grille pan to
housing with (2) grille mounting screws. Install (2) 60W
(Max.) candelabra bulbs (not included). Attach shade
with hardware as shown. Do not overtighten finial nut.
(2) 60W (MAX.)
CANDELABRA
BULBS
(not included)
GRILLE
PAN
MOUNTING
ROD
FELT WASHER
(thick)
SHADE
FELT WASHER
(thin)
GRILLE
BRACKETS
LIGHT PLUG
JAMB NUT
LOCKWASHER
(2) GRILLE
MOUNTING
SCREWS
FLAT WASHER
FINIAL NUT
RETROFIT
4. Remove old fan.
Enlarge ceiling opening (if necessary) to 9¾" parallel to
joist) by 10½" (perpendicular to joist). Leave ductwork
and wiring in place.
1
5. Fold mounting ears flat against
housing.
2
5