Operation; Digital Thermostat Models; Carel - Scancool Gur 600 W Instructions De Maintenance

4. OPERATION

4.1. DIGITAL THERMOSTAT MODELS

4.1.1. CAREL

PYOL1H0531
The operation of the equipment is totally controlled by the digital thermostat,
which allows for the selection of temperature and controls the operation of the
lighting using the button ( models with glass door and opaque door with lighting).
Connect the equipment to the mains. If "OFF" appears in the digital display, press
the ON/OFF button for 3 seconds.
The factory set point in positive refrigerated equipment is +3 °C, and can be set on
the thermostat between + 1ºC and + 10ºC.
In the negative cold models, the factory set point is -20 °C, and can be adjusted in
the thermostat between -16ºC to -22ºC.
In sub-zero models, the factory set point is -2 °C, and can be adjusted between -3ºC
and + 10ºC.
The ACE 66 model, developed as a glass freezer, has a factory set point of -10 °C,
allowing the temperature to be regulated between -8 °C and -12 °C.
In ACE 150 models with a glass door, the factory set point is -18 °C, allowing the
temperature to be regulated between -12 °C and -22 °C.
ON/OFF Button
Set/Change
Defrost
Led
1
2
3
4
5
6
7
PY0L2K0532
Function
Compressor
Fan
Defrost
Auxiliary Output
Clock (RTC) (some models)
Alarm
Algorithms
EN
Light Button
35