Allen + Roth 1212VA-42-201 Manuel page 4

INSTALLATION INSTRUCTIONS
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any water
supply and drain lines once mounted.
2. With two people, carefully place vanity (A) with
top (B) against the wall in its final location. Find
and mark locations of wall studs behind the
permanent location of vanity (A).
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the levelers
counterclockwise will increase the height of vanity (A),
twisting them clockwise will decrease it.
WARNING
Vanity (A) MUST be secured to wall.
3. From inside vanity (A), drill hole through vanity
mounting area and into wall studs. Using
mounting hardware (not included) appropriate
for your installation site, secure vanity (A) to wall
stud. If possible, secure vanity (A) to two wall
studs for increased stability.
2
1
3
4
B
A
A