GIANTEX HU10975-F Mode D'emploi
Manuels Connexes pour GIANTEX HU10975-F
Sommaire des Matières pour GIANTEX HU10975-F
- Page 1 Bed Frame Cadre de Lit HU10975-F&HU10975-Q THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
-
Page 2: Before You Start
Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. - Page 3 ASSEMBLY INSTRUCTIONS /INSTRUCTIONS D’ASSEMBLAGE WARNING ● No rough tools or corrosive detergent for cleaning. ● The package contains some heavy parts and sharp-edged parts, please be careful when assembling to avoid any physical injury around you. ● Please strictly observe the steps of the instructions. ●...
-
Page 4: Part List /Liste Des Pièces
PART LIST /LISTE DES PIÈCES HARDWARE LIST /LISTE DES ACCESSOIRES 5/16" x 25mm 5/16" x 40mm 1/4" x 35mm... - Page 5 1/4" x 40mm 1/4" x 110mm 4 x 35mm FIGURE 01 Install the leg (B) to the Headboard panel (A) by using the Allen bolt (N) with lock washer, flat washer and Allen key (T).See FIGURE 01. /Installez les pieds (B) sur le panneau de tête de lit (A) à l’aide des boulons Allen (N) avec les rondelles de blocage, les rondelles plates et la clé...
- Page 6 FIGURE 02 Install the leg (I) wood dowel (V) to the Footboard panel (C) by using the Allen bolt (Q) with lock washer, flat washer and Allen key (T).See FIGURE 02. FIGURE 02. / Installez les pieds (I) et les chevilles en bois (V) sur le panneau du pied de lit (C) à...
- Page 7 FIGURE 03-A 10mm 10mm FIGURE 03-B Insert set of the bolts (M) with lock washer, flat washer into the fixed nuts on the headboard/footboard by manually. NOTE: Do not fully tighten the bolts, leave at least 10mm visible so that you can hanger hook on the bolts.
- Page 8 FIGURE 04 Install the rail support (F) to the side rail (D/D1) by using the Allen bolt (P) and Allen key (T).See FIGURE 04. /Installez les supports de rail (F) sur le rail latéral (D/D1) à l’aide des boulons Allen (P) et de la clé Allen (T). Voir FIGURE 04.
- Page 9 FIGURE 05 Install the leg support (H) to the side rail by using the Allen bolt (O) with lock washer, flat washer and Allen key (T).See FIGURE 05. / Installez le support de jambe (H) sur le rail latéral à l’aide des boulons Allen (O) avec les rondelles de blocage, les rondelles plates et la clé...
- Page 10 FIGURE 06 Raise the side rail (D/D1) up , bring the side rail and align the hook on the side rail to the bolts. Once the side rail is set, tighten all bolts by using a Allen key (T) as FIGURE 06. After assembly, re-tighten all bolts for a snug fit.
- Page 11 FIGURE 07-A FIGURE 07-B Install the center rail (E) to the slat set (G) by using the screw (S) and tighten by the center legs (J) .See FIGURE 07-A/B. / Installez le rail central (E) sur l’ensemble de lattes (G) en utilisant les vis (S) et serrez par les pieds centraux (J).
- Page 12 ASSEMBLE COMPLETE. /ASSEMBLAGE TERMINÉ...
- Page 13 Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.
- Page 14 USA office: Fontana AUS office: Truganina FRA office: Saint Vigor d'Ymonville GBR office: FDS Corporation Limited,Unit 4, Blackacre Road, Great Blakenham,Ipswich, Ip6 0FL,United Kingdom USA:cs.us@costway.com If you're having difficulty, our friendly AUS:cs.au@costway.com GBR:cs.uk@costway.com customer team is always here to help. FRA:cs.f r @costway.com...