Télécharger Imprimer la page

KIKKA BOO i-DRIVE Mode D'emploi page 13

Publicité

IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
USE 3 POINT SEAT BELT TO INSTALL THE CHILD SAFETY SEAT IN FORWARD FACING POSITION
SUITABLE FOR CHILDREN 100 150 CM
Remove the 5-point safety belt rst.
Put the child safety seat on the car seat, and adjust the child safety seat to the suitable position.
The belt of the car seat passes through the seat belt guider and passes around the child's shoulder.
The belly belt of the car seat belt passes through the belly belt guider and passes the child's pelvis.
Fasten the car seat belt.
NOTICE!
When used from 135-150cm, may not t in all vehicles.
IV. CLEANING AND MAINTENANCE
In the daily using, it is necessary to regularly check the child safety seat.
In case of accident, the safety seat must be replaced.
When the car seat is not in use, the child safety seat should be placed in a dry and ventilated place to avoid damp and mildew.
If there is dust on the surface of the child safety seat,you can use a damp sponge to wipe and ventilate it to dry.
If food or drink drops onto the seat belt by accident, please remove the seat belt and rinse thoroughly with warm water and ventilate it to dry.
Slight fading may occur during the rst washing, which is a normal situation.
Produced for Kikka Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in China.
Complies with EN R129.
ENGLISH

Publicité

loading