Publicité
THOROUGH CLEANING
1. First clean the appliance using the "Auto clean" feature.
2. Disassemble the removable parts. Remove the lid from the container and the measuring cup
from the lid. Turn the jug upside down and unscrew the blade piece clockwise.
3. Clean the measuring cup, the lid and the jar and dry. These parts are also dishwasher sae.
4. Wipe the blade with hot soapy water and rinse under the tap. Do not touch the sharp blades
and take extra care. Leave the blade to dry upside down, ensuring it remains out of the reach of
children.
5. Make sure all parts are dry before reassembling the blender.
I
Do not immerse unit, cord, or plug in water or other liquid.
I
Never use aggressive or abrasive cleaning agents.
I
Store the blender with the lid o. This will help you avoid unpleasant odours.
PROBLEMS AND SOLUTIONS
PROBLEMS
The appliance does not work.
The appliance has a strange smell.
The appliance is making a strange noise.
When disassembling after use, the
bottle's blade attachment remains stuck
in the motor housing.
SOLUTIONS
• Ensure the blender jug is installed correctly. When
using the bottle, ensure that the blade attachment
is rmly screwed into the motor housing. I you
have not turned the blade attachment clockwise
or not far enough (until it clicks into place), the
appliance will not work.
• The motor may overheat. Let the appliance cool
down or 30 minutes and try again.
• Make sure the blade attachment is not blocked.
Check or large pieces blocking the blades. Cut
these into smaller pieces.
• When using the function buttons, the speed
control must be in the 'on' position.
• When rst used, it is normal or the engine to
have an odour. If the problem still occurs after
using it several times, contact the after-sales
service.
• Always place the appliance on a at, stable
surface.
• Check that the blade attachment is properly
installed.
• Put enough pressure on the bottle and turn
counter-clockwise while pressing down. Then the
blade attachment should come o.
www.domo-elektro.be
33
Publicité
