CANARMNA harmonizedhone BL-30B Mode D'emploi

LED BATH VANITY LIGHT
!
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER
OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER. WAIT FOR IT TO COOL. WIPE THE OUTSIDE SURFACE OF FIXTURE WITH
A CLEAN, DRY AND SOFT CLOTH. NO SERVICE PART IS REQUIRED INSIDE THE FIXTURE.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION STEPS:
1. Attach mounting plate to the Junction box with two
mounting screws.
2. Optional feature - Slide switch to choose color
temperature. The options are 3000K, 4000K and 5000K.
(not available for single CCT version)
3. Connect the ground wires (bare copper or green)
from your fixture to the ground wire (bare copper or
green) or ground screw in the electrical box. Attach the
black wire from the light fixture to the black wire in the
electrical box. Attach the white wire from the light
fixture to the white wire in the electrical box.
4. Once the wires are connected, ensure to push back
all the wire nuts into the Junction box.
5. Place the fixture over the mounting plate, and secure with two bracket screws.
Compatible wall dimmers : Leviton# 742-66EV-P0W, Leviton# 742-6672-HLW, Leviton# 722-6674-PDW, Lutron# SCL-153PH-WH
BL-30B-18: Max # of Lamps per 150W Dimmer: 12 pcs
BL-30B-24: Max # of Lamps per 150W Dimmer: 9 pcs
BL-30B-30: Max # of Lamps per 150W Dimmer: 7 pcs
Imported By: 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Wire Cutters
Screwdriver
Pliers Wrench
mounting
plate
mounting
screw
bracket screw
white
black
11/24
BL-30B
Wiring supplies
as required by
local electrical
code
ground
CCT switch
3000K 4000K 5000K