ION Glow Rocker Guide D'utilisation page 6

Troubleshooting
If the unit is not charging: Make sure the micro-USB cable is properly connected to the
power input, the power adapter and the power outlet.
If the sound is distorted: Try lowering the volume control of your sound source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to Glow Rocker
Have your audio device (e.g., smartphone or tablet) and Glow Rocker
•
as possible while trying to connect. Make sure both the audio device and Glow Rocker
are unobstructed by walls, furniture, etc.
Reset the Bluetooth connection on Glow Rocker
•
other audio device and restart the search process. If this does not work right away,
power off Glow Rocker
Glow Rocker
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back
•
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Glow Rocker
TM
Rocker in the list of available or previously connected devices in your audio device's
Bluetooth menu, tap the "gear" or "i" icon located next to it and then select Unpair or
Forget. Turn Glow Rocker
your available devices list.
Note: If Glow Rocker
range, you may need to repeat this process with that audio device to fully disconnect.
6
TM
and then power it back on. See
TM
for more information.
TM
off and back on and try pairing again once it reappears in
TM
has been paired to another audio device recently that is still within
TM
via Bluetooth:
TM
to disconnect Glow Rocker
Bluetooth Connecting with
TM
as close together
TM
from any
TM
before, find Glow
TM