Emergency Stop Switch (Locking Push Button); Figure 2 Emergency Stop Switch - Milnor 48040F7D Miltouch Manuel

Controls
Door open/close switch (
chine is idle.
To move the door, hold the door open/close switch in the desired position while you hold the
door unlock button (
Close the door.
Open the door.
The automatic door feature is optional for this machine.
BNVLUO01 / 2018513
2.2

Emergency Stop Switch (locking push button)

One or more emergency stop switches (pictured below) may be provided on the device. When
pressed, any emergency stop switch removes power from the machine controls, stops the ma-
chine, and locks in the depressed (switch actuated, machine stopped) position. When safe to do
so, turn the button clockwise to unlock the switch. To resume operation, perform the device's nor-
mal startup procedure.
Figure 2. Emergency Stop Switch
Stopped Position
NOTICE: Press the emergency stop switch immediately in an emergency situation.
Display or Action
6
) — This switch controls the automatic door when the ma-
) depressed.
Explanation
This symbol represents the emergency stop switch in Milnor
documents other than electrical wiring diagrams.
BNVLUO01 0000189558 E.2
BNVLUO01.C01 0000189557 B.4 E.2 F.2 12/9/20, 9:19 AM Released
Run Position
1/2/20, 2:17 PM Released
®
Pellerin Milnor Corporation