Power Switch - Caliber Retro Riley Manuel

SPECIFICATIONS, CONNECTIONS AND BUTTONS
Bluetooth version:
®
Bluetooth range:
®
Bluetooth Freq range:
®
Speakers:
Built-in connections:
Power supply:
Dimensions:
Applicable to batch number 324003 and above.
Specific features may not apply to earlier batch numbers.
1. USB
Standard USB port (up to 32 GB)
2. AUX-in
3.5mm jack connector, for optional wired audio input
connection (3.5mm jack-to-jack cable included)
3. LED indication light Bluetooth
• Flashing blue: Bluetooth pairing mode
• Solid blue: Bluetooth connection active
• Fast flashing blue: TWS pairing mode
4. LED indication light ON
Solid red: power is ON

5. Power switch

To power ON/OFF the unit
When power switch is set to AUTO it will go into
standby mode after 9 minutes, if it's not receiving
and audio signal
6. 7
Short press: Previous track in USB/BT mode
Long press: In USB mode, fast rewind.
In Bluetooth mode, Activate TWS
V5.0 + EDR
supports A2DP & AVRCP profile
up to 1 0 meters
2402-2480 Mhz
Max e.r.p: <100mW/20dBm
(2x) 4" Mid/Low speaker + (2x) 1.5" Tweeter
2x 40W RMS (200W Max)
- Standard USB connection (reader • max 32GB)
- Aux-in 3.5mm jack connection
100V-240VAC 50~60Hz
350 x 196 x 214
(W) (D) (H)
7. 12 wake
• Play/pause in USB/BT mode
Wake from standby-mode
8. 8
• Short press:
• Long press:
9. Volume
Rotary button to in- and decrease volume
10. Bass
Rotary button to in- and decrease bass
1 1. Treble
Rotary button to in- and decrease treble
12. Power input
100-240VAC 50~60Hz
(powercord with euro plug provided)
mm
Next track in USB/BT mode
In USB mode, fast forward
In Bluetooth mode,
reset Bluetooth connection
®