Plum 27622AD69 Instructions De Montage

Discovery Woodland Treehouse
Assembly Instructions
Cabane dans les arbres
Instructions de montage
Casa de árbol
Instrucciones de montaje
Casetta sull'albero
Istruzioni di montaggio
Baumhaus
Montageanleitung
27622AD69
EN ASTM
Maximum fall height: 91cm
Installation Instructions
1. Place the equipment on level ground, not less than 6 ft (1.8 m) from
any structure or obstruction such as a fence, garage, house, overhanging
branches, laundry lines, or electrical wires.
2. Do not install home playground equipment over concrete, asphalt,
packed earth, grass, carpet, or any other hard surface. A fall onto a hard
surface can result in serious injury or death to the equipment user.
3. To prevent serious injury, children must not use the equipment until
properly installed.
4. Make sure that all the bolts are tightened securely, tighten the nuts
on bolts flush to the tube (or member) and the caps which go over the
exposed bolts shall be put on snug to the nut
Maintenance Instructions
1. At the beginning of each play season:
1. Tighten all hardware.
2. Lubricate all metallic moving parts per manufacturer's instructions.
3. Check all protective coverings on bolts, pipes, edges, and corners.
Replace if they are loose, cracked, or missing.
4. Check all moving parts including swing seats, ropes, cables, and
chains for wear, rust, or other deterioration. Replace as needed.
5. Check metal parts for rust. If found, sand and repaint using a
nonlead-based paint meeting the requirements of 16 CFR 1303.
6. Check all wood members for deterioration and splinters. Sand down
splinters and replace deteriorating wood members.
7. Reinstall any plastic parts, such as swing seats or any other items
that were removed for the cold season.
8. Rake and check depth of loose fill protective surfacing materials
Plum Products Hong Kong Ltd
Unit 705, 7th Floor, Tower A,
New Mandarin Plaza,
14 Science Museum Road,
TST East, Kowloon,
Hong Kong
www.plumplay.com
Customer Service Support in US:
Customer Service Support in Canada:
Copyright Plum Products 2024
to prevent compaction and to maintain appropriate depth. Replace as
necessary.
2. Once a month during play season:
1. Lubricate all metallic moving parts per manufacturer's instructions.
2. Check all moving parts including swing seats, ropes, cables, and
chains for wear, rust, or other deterioration. Replace as needed.
3. Twice a month during play season:
1. Tighten all hardware.
2. Check all protective coverings on bolts, pipes, edges, and corners.
Replace if they are loose, cracked, or missing.
3. Rake and check depth of loose fill protective surfacing materials to
prevent compaction and to maintain appropriate depth. Replace as
necessary.
4. At the end of each play season
1. Remove plastic swing seats and other items as specified by the
manufacturer and take indoors or do not use.
2. Rake and check depth of loose fill protective surfacing materials to
prevent compaction and to maintain appropriate depth. Replace as
necessary.
5. At the end of each play season or when the temperature drops
below 32°F:
1. Remove plastic swing seats and other items as specified by the
manufacturer and take indoors or do not use.
2. Rake and check depth of loose fill protective surfacing materials
to prevent compaction and to maintain appropriate depth. Replace as
necessary.
6. Owners shall be responsible for maintaining the legibility of the
warning labels.
SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION'S
OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK
X2.1 Select Protective Surfacing—One of the most important things
you can do to reduce the likelihood of serious head injuries is to install
shock-absorbing protective surfacing under and around your play
equipment. The protective surfacing should be applied to a depth that is
suitable for the equipment height in accordance with ASTM Specification
F1292. There are different types of surfacing to choose from; whichever
product you select, follow these guidelines:
X2.1.1 Loose-Fill Materials:
www.plumplay.com/contact-us-com
CAhelpdesk@plumplay.com