Publicité
"ALGAM LIGHTING" APPLICATION
DRAWING FUNCTION
Drawing a Pattern: The central section of the interface is the pattern control area, where
>
you can perform the following actions:
1) Click on the icon
2) Use your finger to draw the desired pattern on the large area in the center of the
screen.
3) Click on the icon
or tracing patterns more easily.
Pattern Modification:
>
1) Select a Pattern: Click on the edit circle icon located in the bottom-right corner
of the central area.
2) Drag your finger over the drawn pattern to select it.
3) Move the Pattern: Drag your finger across the central area, and the selected
pattern will move accordingly.
4) Zoom In or Out: Use two fingers to pinch or spread them apart within the central
area. The selected pattern will zoom in or out accordingly.
5) Change the Color: Click on a color button in the color selection area at the top of
the interface. The selected pattern will change to the chosen color.
6) Delete the Pattern: Once a pattern is selected, a delete button will appear in the
bottom-left corner. Click it to remove the pattern.
Graphic Operations and Parameter Configuration: The Clear and Back buttons can be used
>
to clear the drawn pattern, allowing you to redraw the design.
1) Click the Config. button to set up the parameters, including size, rotation angle,
rotation type, as well as horizontal and vertical movements of the graphic.
2) Select the parameter to configure on the left, scroll up or down on the right to
adjust the parameter value, then click the OK button to save the setting.
3) After designing the pattern, click the Send button to display the pattern effect on
the device.
Enter Text: : Type the text into the input field. Use your finger to drag and drop the text to
>
the center of the screen. You can also select different fonts from the left side of the input
area.
Select a Built-in Pattern: Scroll through the list of patterns to view all available built-in
>
designs. After selecting a pattern, drag it with your finger to the center of the screen and
drop it.
to enable the manual pattern drawing function.
to upload a background image, which can assist in creating
P.31
Publicité
