Axis F9114-R Mk II Guide D'installation page 6

English
Safety instructions
NO TICE TICE
NO NO TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
This product is for professional use.
•
Install this product at a safe distance from
children.
•
Axis recommends using a shielded network
cable (STP).
•
Axis recommends using a network cable of
category CAT6 or higher.
•
To use the Axis product outdoors, or in
similar environments, it shall be installed in
an approved outdoor housing.
•
Store the Axis product in a dry and
ventilated environment.
•
Avoid exposing the Axis product to shocks
or heavy pressure.
•
Do not install the product on unstable
poles, brackets, surfaces or walls.
•
Use only applicable tools when installing
the Axis product. Using excessive force
with power tools could cause damage to
the product.
•
Use a soft cloth dampened with pure
lukewarm water to clean the device.
•
Don't use chemicals such as window cleaner
or acetone to clean your device.
•
Use only accessories that comply with the
technical specification of your product.
These can be provided by Axis or a third
party. Axis recommends using Axis power
source equipment compatible with your
product.
•
Use only spare parts provided by or
recommended by Axis.
•
Do not attempt to repair the product
yourself. Contact Axis support or your Axis
reseller for service matters.
•
The power supply shall be plugged in to a
socket outlet installed near the product and
shall be easily accessible.
•
Use a limited power source (LPS) with a
rated output power limited to ≤100 W and
a rated output current limited to ≤5 A.
Transportation
NO NO TICE NO TICE TICE
•
When transporting the Axis product, use
the original packaging or equivalent to
prevent damage to the product.
Battery
The Axis product uses a 3.0 V CR2032 lithium
battery as the power supply for its internal
real-time clock (RTC). Under normal conditions
this battery will last for a minimum of five years.
Low battery power affects the operation of
the RTC, causing it to reset at every power-up.
When the battery voltage is low, a log message
will appear in the product's server report.
CAUTION
Do not replace the battery yourself. Contact
Axis support if the log message requests a
battery change.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS no. 110-71-4.
Français
Consignes de sécurité
A A A VIS VIS
VIS
•
Le produit Axis doit être utilisé
conformément aux lois et règlements
locaux.
•
Ce produit est destiné à un usage
professionnel.
•
Installez ce produit à une distance sûre des
enfants.
•
Axis recommande d'utiliser un câble réseau
blindé (STP).
•
Axis recommande d'utiliser un câble réseau
de catégorie CAT6 ou supérieure.
•
Pour pouvoir utiliser le produit Axis à
l'extérieur, ou dans des environnements
similaires, il doit être installé dans un
boîtier d'extérieur homologué.
•
Conserver ce produit Axis dans un
environnement sec et ventilé.
•
Ne pas exposer ce produit Axis aux chocs
ou aux fortes pressions.
•
Ne pas installer ce produit sur des poteaux,
supports, surfaces ou murs instables.
•
Utiliser uniquement des outils recommandés
pour l'installation de l'appareil Axis.
L'application d'une force excessive sur
l'appareil avec des outils puissants pourrait
l'endommager.
•
Pour nettoyer le dispositif, utilisez un
chiffon doux humide à l'eau tiède pure.
6